Reglazing FAQ in Fremont, CA
Straight answers on cost, durability, cure time, materials, peeling and warranty for tub, shower, sink, countertop and tile refinishing across Fremont. Fully licensed & insured.
Open Mon–Sat 7:30 AM–6 PM
The questions Fremont homeowners and landlords ask most
These are the questions we field every week from callers across Mission San Jose, Glenmoor, Centerville and the rest of Fremont — the real ones about price, how long the finish lasts, the smell, the cure time and what reglazing can and cannot fix. The answers below are the same ones we give on the phone. If yours is not here, call (510) 929-3220, Monday through Saturday, and ask.
Fremont reglazing FAQ
Who does bathtub reglazing in Fremont?
Fremont Tub Refinishing Pros reglazes and refinishes bathtubs, showers, sinks, countertops and tile throughout Fremont, CA. Call (510) 929-3220, Monday through Saturday 7:30 AM to 6 PM, for a free same-day quote.
How much does bathtub reglazing cost in Fremont?
In Fremont, bathtub reglazing runs $709 to $875, shower refinishing $905 to $1,025, sinks $409 to $485, countertops $505 to $625, and tile from $505. The exact price depends on the fixture's material, size and condition.
How long does bathtub reglazing last?
A professionally reglazed bathtub lasts 10 to 15 years with everyday care. We spray an acrylic-urethane topcoat over a bonded primer, which holds up far longer than the 3 to 5 years typical of a hardware-store DIY kit.
How long before I can use a reglazed tub or shower?
The surface is dry to the touch in a few hours and ready for normal use 24 to 48 hours after the final coat cures. We tell you the exact time to wait before we leave, and we return or re-caulk once the finish has set.
Is reglazing worth it, or should I replace the tub?
Reglazing costs roughly 50 to 75 percent less than tearing out and replacing a tub, and it is finished in a day with no demolition. For a structurally sound tub that is just stained, chipped or dated in color, refinishing is the practical choice.
How long does the job take?
Most Fremont tub or shower jobs are done in 3 to 5 hours, same day. We mask and ventilate the room, complete the prep and spraying in one visit, and leave the surface curing on site.
What is the difference between reglazing, refinishing and resurfacing?
They are three names for the same process: cleaning and prepping the existing fixture, then bonding a new sprayed coating to it. None of them involve a plastic liner or a full replacement, and the finished surface looks and feels like new porcelain.
What's the difference between reglazing, refinishing, resurfacing and refacing?
Fremont callers use all of these words, plus re-enameling, for one job: we bond a single fresh coating onto your existing tub, shower, sink, countertop or tile so it looks new, with no tear-out. Refacing means the same thing here. What it is not is a bath liner or insert — that is a separate acrylic shell set over the old fixture. We restore the original surface instead, which is why the finish stays slim against the tub wall and lasts 10 to 15 years.
Can you reglaze a fiberglass or acrylic tub?
Yes. Fiberglass and acrylic tubs and shower surrounds are scuff-sanded and primed with an adhesion promoter, then sprayed with the same acrylic-urethane topcoat. This restores faded, crazed gelcoat. Many Centerville and Irvington apartment tub-and-shower combos are fiberglass.
Can you reglaze bathroom tile?
Yes. Wall and tub-surround tile is cleaned, the grout is etched, and a bond coat plus topcoat give it a new color without a tear-out. The grout lines are sealed in the process, so the powder-blue or pink tile common in older Niles and Irvington baths can be brought to a clean white or neutral.
Can I choose a color other than white?
Yes. White is standard, but we also spray off-white, bone, biscuit and matched custom shades, and we resurface countertops in solid or stone-look finishes. A custom color is a small add-on to the base price.
Why is my reglazed tub peeling, and can it be fixed?
Peeling and delamination almost always come from skipped prep, usually a DIY kit or a rushed job that never properly etched or primed the surface. We strip the failed coating back to a sound substrate, re-etch or scuff-sand, and refinish it correctly so the new finish bonds.
Can you repair chips, cracks and rust before refinishing?
Yes. Chips are filled and sanded level, rust spots are ground out and treated, and hairline surface cracks are filled before the topcoat goes on. A structural crack that flexes or a tub rusted through the floor is a replacement conversation, and we will tell you honestly which yours is.
Is there a smell, and do I need to leave the house?
There is a solvent odor during spraying, which is why we mask the room, run ventilation and contain the overspray. You do not have to leave the house, but we ask you to keep the bathroom door closed and the window cracked until the finish cures, usually a day.
How do I clean and care for a reglazed surface?
Use a non-abrasive cleaner and a soft cloth or sponge. Skip scouring powders, abrasive pads and harsh acidic or bleach-heavy products, and avoid leaving rubber bath mats with suction cups sitting wet on the floor. Cared for this way, the finish stays glossy for its full 10 to 15 years.
Can you add a slip-resistant bottom to the tub?
Yes. We can spray a textured, slip-resistant finish on the tub floor, which is popular in family homes and rental units. It is a small add-on and is applied during the same visit as the reglazing.
Do you offer a warranty, and are you licensed and insured?
Every job is backed by a 5-year written warranty on the finish, and Fremont Tub Refinishing Pros is fully licensed and insured. Keep your receipt; the warranty covers adhesion and finish failure under normal household use.
Do you work with landlords and property managers?
Yes. We refinish tubs, showers and surrounds for rental turnovers across Fremont, with per-unit pricing for multiple units and scheduling that fits a vacancy window. Many Centerville and Irvington apartment combos can be turned around in a day or two.
What areas of Fremont do you serve?
We serve all of Fremont and the Tri-City area, including Mission San Jose, Niles, Centerville, Irvington, Ardenwood, Warm Springs, Glenmoor, Cabrillo, Sundale and Brookvale, across ZIP codes 94536, 94538, 94539 and 94555.
How do I get a quote and book?
Call (510) 929-3220, Monday through Saturday 7:30 AM to 6 PM, or book online. Send a couple of photos of your fixture and we give you a firm price range, then schedule a visit that fits your week.
Still have a question? Ask us
Open Mon–Sat 7:30 AM–6 PM. Fully licensed & insured, with a 5-year written warranty.
Call (510) 929-3220 Book online